Strada della Fabbrina, 6/E - 61122 Pesaro

Having an innate drive towards automation in its DNA, Italyvacuum does not accept downward compromises and adopts exclusively automatic filter cleaning systems.

Any form of manual cleaning is normally more expensive because the operator himself has to deal with it, thus subtracting time from the actual production, and it is moreover dependent on the experience of the operator himself.

Italyvacuum supplies various cleaning systems that are specially designed based on the model of the vacuum cleaner, type of material to be vacuumed, level of danger and other parameters that allow us to understand the best and cheapest solution for the end customer.

Its exclusive systems that use air jets, filter shaking and special latest generation anti-grip fabrics at the same time, are the result of years of research. They guarantee the best solution for maximum system efficiency.

The various systems can be programmable at the end of the cycle or can be operated in semi-automatic mode using a special selector.

Vibrotec

The Vibrotec system represents an excellent fabric filter cleaning system which, thanks to its powerful pneumatic motor, is able to vigorously shake the filter along its entire length.

It is also extremely flexible because it can work with different operating pressures in addition to the one indicated by the manufacturer so that the customer can optimize its use according to their needs and the type of material vacuumed.

It is normally operated manually (approx 50 / 60 seconds per cycle) but on request it can be programmed and become fully automatic.

Photo 1
Photo 2
Photo 3
Photo 4

Rotojet

The Rotojet system proposed by Italyvacuum undoubtedly represents the most advanced cartridge filter cleaning system existing on the market and is particularly recommended for large filtering surfaces and for specifically difficult dust types.

The system is connected to a continuously-pressurized air tank and the discharge is activated by a particular quick discharge valve. The resulting counter-current air flow manages to enter the deepest points of the filter folds, shaking it vigorously and allowing the fall of the inherent dust, thus optimizing the quality of cleaning.

Thanks to a powerful air jet through the upper entrance of its aluminum structure, it allows the mobile plate to hermetically close the filter, blocking the flow of dust so that all the power of the air jet generated inside is 100% exploited without any dispersion. A series of holes made on the rotating structure allows the air to escape in a controlled manner along the entire height of the filter thus obtaining double effect cleaning: both along the entire vertical axis and also along the entire perimeter at 360° with the same power and intensity.

In order to allow further customization of filter cleaning according to the needs of the end customer, Rotojet is a fully programmable system both manual and automatic, for the duration of the air jet and the frequency of the washing cycles.

Photo 1
Photo 2
Photo 3
Photo 4
Photo 5
Photo 6
Photo 7
Photo 8

Fastjet

The Fastjet system allows the cleaning of the cartridge filter through a system designed by Italyvacuum technicians which, by developing some technological innovations, differs from the others on the market.

It makes use of most of the powerful air jet generated inside the cartridge filter so that the air arrives the farthest and hardest-to-reach areas.

Programmable for manual and automatic modes, both for the duration of the air jet and for the frequency of the washing cycles.

 

Photo 1
Photo 2
Logo
Ita Eng Esp Fra Deu Por