Blow Chips and dust vacuum cleaners | Industrial vacuum cleaners Italyvacuum

BLOW is one of the most performing models in the chips and dust division. From the very first sight, the project unequivocally highlights the simplicity and practicality of the system which, combined with the elegance of its design, makes the BLOW a particularly efficient and interesting vacuum cleaner.

Required in sectors where you normally work 24 hours a day, the Blow Chips and Dust Vacuum Cleaners are equipped at the base of the central unit with a rotary valve which continuously unloads the material either onto a big bag or onto a container equipped with wheels; this in order to never interrupt the workflow.

The special conformation of the fans used in these units allow the suction of the material even from a considerable distance.

Particularly powerful and performing, they are the essential equipment for large cutting centers and/or automatic panel saws dedicated to a type of heavy work and specifically suitable for the automotive and iron metallurgy sector.

GENERAL INFORMATION
Motors available: from 4 kW ( 5.5hp ) to 24 kW ( 33hp ) - Fan
N° inlet [ Ø ]: N° 1 [ 200mm – 8” ]
Note: 24h continuous unloading on containers or big bags

Available in ATEX version
Certifications available: C.E. / UL-CSA / CURUS
* available in all voltages and frequencies worldwide

Request information

Industrial applications chips and dust vacuum cleaners

Main advantages of the system
Materials included in the basic supply
Optionals available

Possibility of its use as a centralized system which diminishes the positioning distance between the vacuum cleaner and the point of application thus allowing to keep its power without any load loss;
Technological and highly effective integrated cyclonic system as a standard on each model with division of the air flow inside the vacuum cleaner. It is calculated and optimized with the help of a powerful dedicated software;
The BLOW model can be connected to one or more machines and thanks to the special rotary valve supplied; it allows unloading of the suctioned material 24 hours a day without stopping;
Unloading can take place on tilting containers with wheels or on big bags;
Frame structure in 100% heavy gauge steel with scratch-resistant powder coating;
The modularity of the two single pieces that compose it are ideal for an easy and fast assembly;
Possibility of equipping the vacuum cleaner with a series of accessories designed for the specific application of the user;
Pneumatic and electronic interface with single or multiple machine tools through remote control systems (on/off – gate valves – etc.)
Maintenance interventions on the filters and relative expenses practically eliminated thanks to the anti-clogging bag filtration system (practically the shavings, swarf, chips or dust never reach the filter at the top by virtue of the integrated cyclonic system in the upper structure)
Clear visibility of the proper functioning of the system even from a distance owing it to the pressure filter which clearly and unequivocally highlights its status;
Available in every voltage and frequency worldwide;

Basic structure completely soundproofed by panels with high sound-absorbing power
Large class M bag filter with special high density anti-grip polyester fabric
Practical large hinged door on the upper cone for visual control
Lifting hooks at the base structure for ease of lifting and positioning using a forklift
Electrical box with indicator lights and alarm buzzer with clear visibility of its status even from a distance

“Contactless” antistatic system for grounding residual currents
Remote start on/off - allows the vacuum cleaner and the machinery to be switched on and off simultaneously and automatically.
Manual and automatic gate valves for diverting and distributing the air flow
Containers available at 600 Lt ( 160 gal ) / 1100 Lt ( 290 gal ) / 2200 Lt ( 580 gal ) - additional containers of various capacities with automatic openings
Smooth spiral tubes inside for improved flow of the suctioned material
Telescopic Support - Specially designed to support extraction pipes for CNC machines, it allows the pipe to descend from the top, avoiding any kind of obstruction for the operator.